Engineering Mechanics: Statics & Dynamics (14th Edition)

Published by Pearson
ISBN 10: 0133915425
ISBN 13: 978-0-13391-542-6

Chapter 22 - Vibrations - Section 22.6 - Electrical Circuit Analogs - Problems - Page 675: 54

Answer

$14.6mm$

Work Step by Step

We can find the required vibration as follows: $K=\frac{mg}{\delta}$ $\implies K=\frac{25\times 9.81}{0.05}=4905N/m$ $\omega_n=\sqrt{\frac{K}{m}}$ $\implies \omega_n=\sqrt{\frac{4905}{25}}=14rad/s$ and $F_{\circ}=mr\omega_{\circ}^2$ $\implies F_{\circ}=3.5\times 0.1\times (10)^2$ $\implies F_{\circ}=35N$ Now $x=\frac{F_{\circ}/K}{1-(\frac{\omega_{\circ}}{\omega_n})^2}$ We plug in the known values to obtain: $x=\frac{35/4905}{1-(\frac{10}{14})^2}$ $\implies x=0.0146m=14.6mm$
Update this answer!

You can help us out by revising, improving and updating this answer.

Update this answer

After you claim an answer you’ll have 24 hours to send in a draft. An editor will review the submission and either publish your submission or provide feedback.